IP Prefix-List
To create a Prefix-List you need tobe in global configuration mode : ip prefix-list ( option ) ( name ) seq (sequence number ) ( permit or deny ) (x.x.x.x )/(x) then you can use le and ge or a…
Read more
Network Engineer – F.O.C.U.S Follow One Course Until Successful
To create a Prefix-List you need tobe in global configuration mode : ip prefix-list ( option ) ( name ) seq (sequence number ) ( permit or deny ) (x.x.x.x )/(x) then you can use le and ge or a…
Read more
IP SLA use the concept of an operation. Each operations define the type of packet that the router will generate. IP SLA features measures the ongoing behavor of the network. IP SLA act as a tool to test and gather…
Read more
When a Packet arrive on the interface of a router the router take several logical decisions base on the data plane to process the packet. The packet arrive encapsulated inside the data link frame , so the router check the…
Read more
Router functions or divided in 3 operations planes : Management plane “Management operation ( ssh , vty etc … )” Control Plane” “Packet Fowarding Decision ( routing protocols )” Data Plane “Forwading Decision through a router ( End user to…
Read more
Stateless DHCPv6 (config)#ipv6 dhcp pool ( name ) (config-dhcpv6)#dns-server ( address ) (config-dhcpv6)#domain-name ( name ) the following command to configure the VLAN (#) interface to operate as a DHCPv6 server using the pool name (config-if)#ipv6 dhcp server ( pool name…
Read more
Stateless Address Autoconfiguration (SLAAC) is a form of IPv6 configuration in which an IPv6 gateway device can assign IPv6 addresses to clients from its own prefix. Unlike Dynamic Host Configuration Protocol version 6 (DHCPv6), SLAAC does not support more granular…
Read more
StackWise-capable switch has a stack member number of 1 and a priority of 1. When a new switch is added to an existing stack, the member number will change to the lowest available number in the stack. The bridge ID…
Read more
Basic Configuration : The following command to configure the switch interface with voice ( vlan # ) (config-if)#switchport voice vlan ( # ) The following command from global con guration mode to enable QoS for the switch: (config)#mls qos The…
Read more
Configuration example : (config)#spanning-tree mode mst (config)#spanning-tree mst configuration (config-mst)#instance 1 vlan ( # ) (config-mst)#name ( name ) (config-mst)#revision ( # ) (config-mst)#exit You can adjust the priority of the instance by using : (config)#spanning-tree mst (#) priority ( #…
Read more